In early 1995, Apple announced that it had shipped one million Power Macs within one year of their introduction, showing an overwhelming acceptance of the new technology.
Yearly Archives: 1995
The DayStar Genesis MP was the first multiple processor Mac OS computer, introduced in October 1995 in a four processor version. It came in dual- and quad-processor versions based on the PowerPC 604 processor.
The PowerWave was a desktop computer with a 120 to 150 MHz PPC 604 processor. The CPU is on a daughter card for easy upgrade, just like the Power Mac 7500, 8500, and 9500.
The Performa 6300 (a.k.a. 6260, 6290, 6310) replaced the 6200‘s 75 MHz 603 with a faster 100 MHz 603e CPU. The 6300 was replaced with a 120 MHz model in April 1996.
The Performa 5300 was the second PowerPC (PPC) Mac with an integrated multiscan 15″ monitor, sharing the design of its predecessor, the 5200. Although the PPC 603 CPU was superior to the older 601, the computer architecture kept performance of this 100-120 MHz model comparable to an 80 MHz Power Mac 7100.
The PowerBook Duo 2300c was Apple’s only PowerBook Duo based on a PowerPC CPU. To make the 2300c compatible with Duo Docks for earlier models, the 100 MHz 64-bit PowerPC 603e CPU was used on a 33 MHz 32-bit bus, which seriously compromised performance.
The PowerBook 190 was Apple’s last model based on a Motorola 68040 CPU. The base model has a 640 x 480 4-bit passive matrix grayscale display; the 190cs has an 8-bit color display.
The PowerBook 190 was Apple’s last model based on a Motorola 68040 CPU. The 190cs has an 8-bit dual-scan passive matrix color display. Apple eliminated the internal modem bay and the ethernet port found in the previous 500 series, forcing buyers to acquire these items separately.
The PowerBook 5300 was Apple’s first PowerBook based on a PowerPC CPU. Due to fire problems with the original LithIon battery (which was recalled before it reached the consumer market), plastic chipping from the case, and poor performance (among other things), we label it a Compromised Mac. (It was also the butt of a lot […]
Using the same case as the Power Mac 8100, the 8500 (a.k.a. 8515) was the first Mac minitower with a replaceable CPU daughter card. Unlike the first generation of Power Macs, the 8500 has PCI slots and uses the PowerPC 604 processor, a significantly improved, second-generation PPC design.
Apple introduced a brand new case design with the Power Mac 7200 and 7500, one with a slide-off cover, an extra internal drive bay (compared to the Power Mac 7100 they replaced), and a flip-up drive/power supply assembly, providing easy access to the motherboard.
The Power Mac 7200 was the entry level second-generation Power Mac, part of the first group of Macs to use the PCI bus instead of older, slower NuBus. Originally produced in 75 MHz and 90 MHz versions (a.k.a. Power Mac 7215/90), the slower model was phased out when the 120 MHz model was introduced in […]
The System 81/110 was Radius’ second Macintosh clone. It was built around a slightly modified Power Mac 8100 motherboard.
The LaserWriter 4/600 PS was the last low-end LaserWriter; it supports 600 dpi resolution. Its only connection is for LocalTalk networking.
The Color LaserWriter 12/600 PS was a no compromise color laser printer with 600 dot-per-inch output, 110 lb. of weight, and gorgeous output. It uses four separate toner cartridges – black, cyan, yellow, and magenta.
Blackbird was Apple’s code name for a line of PowerBooks based on Motorola’s 68LC040 and 68040 processors. (The LC version draws less power and has no FPU.) The PowerBook 550c was available only in Japan. Differences from the rest of the 500-series include use of regular 68040 (not the stripped down 68LC040), a 750 MB […]
Using the same case as the 9150, the 9500 (a.k.a. 9515) was the first Power Mac tower with a replaceable CPU daughter cards. Unlike the first generations Power Macs, the 9500 had PCI slots and used the PowerPC 604 processor, a significantly improved, second-generation PPC design.
The 75 MHz Power Macintosh 6200 (a.k.a. Performa 6200, 6205, 6210, 6214, 6216, 6218, 6220, and 6230!) was one of the first Macs to use the PowerPC 603 processor. Although the CPU was superior to the older 601, the computer architecture kept performance of the 6200 – and it’s built-in monitor twin, the 5200 – comparable to […]
The Power series was Power Computing’s first generation Mac compatible. As faster PowerPC 601 CPUs became available, Power bumped this model from 80 MHz to 100 MHz, and then to 120 MHz.
The LC 580 (a.k.a. Performa 580 and 588) is essentially an LC 575 with a new logic board that supports an IDE hard drive (instead of the more expensive SCSI hard drive used in earlier 500 series Macs) and uses a less expensive monitor.
The 75 MHz Performa 5200 was the first PowerPC Mac with an integrated monitor. Although the PPC 603 CPU was superior to the older 601, this computer’s architecture kept performance of the 5200 – and it’s monitor-less twin, the 6200 – comparable to a 66 MHz Power Mac 6100.
The System 100 was the first authorized Macintosh clone. It was built around a slightly modified Power Mac 8100 motherboard: Radius used a standard Mac DA-15 video port instead of the 8100’s 45-pin AV port.
